SCP(1)

NAME
scp - OpenSSH secure file copy

SYNOPSIS
scp [-346ABCOpqRrsTv] [-c cipher] [-D sftp_server_path] [-F ssh_config] [-i identity_file] [-J destination] [-l limit] [-o ssh_option] [-P port] [-S program] [-X sftp_option] source... target

DESCRIPTION
scp copies files between hosts on a network. scp uses the SFTP protocol over an ssh(1) connection for data transfer, and uses the same authentication and provides the same security as a login session. scp will ask for passwords or passphrases if they are needed for authentication. The source and target may be specified as a local pathname, a remote host with optional path in the form [user@]host:[path,] or a URI in the form scp://[user@]host[:port][/path.] Local file names can be made explicit using absolute or relative pathnames to avoid scp treating file names containing `:' as host specifiers. When copying between two remote hosts, if the URI format is used, a port cannot be specified on the target if the -R option is used. The options are as follows:

-3  Copies between two remote hosts are transferred through the local host. This mode is the default, but see also the -R option for copying data directly between two remote hosts. Note that when using the legacy SCP protocol (via the -O flag), this option selects batch mode for the second host as scp cannot ask for passwords or passphrases for both hosts.

-4  Forces scp to use IPv4 addresses only.

-6  Forces scp to use IPv6 addresses only.

-A  Allows forwarding of ssh-agent(1) to the remote system. The default is not to forward an authentication agent.

-B  Selects batch mode (prevents asking for passwords or passphrases).

-C  Compression enable. Passes the -C flag to ssh(1) to enable compression.

-c cipher
    Selects the cipher to use for encrypting the data transfer. This option is directly passed to ssh(1).

-D sftp_server_path
    Connect directly to a local SFTP server program rather than a remote one via ssh(1). This option may be useful in debugging the client and server.

-F ssh_config
    Specifies an alternative per-user configuration file for ssh. This option is directly passed to ssh(1).

-i identity_file
    Selects the file from which the identity (private key) for public key authentication is read. This option is directly passed to ssh(1).

-J destination
    Connect to the target host by first making an scp connection to the jump host described by destination and then establishing a TCP forwarding to the ultimate destination from there. Multiple jump hops may be specified separated by comma characters. This is a shortcut to specify a ProxyJump configuration directive. This option is directly passed to ssh(1).

-l limit
    Limits the used bandwidth, specified in Kbit/s.

-O  Use the legacy SCP protocol for file transfers instead of the SFTP protocol. Forcing the use of the SCP protocol may be necessary for servers that do not implement SFTP, for backwards-compatibility for particular filename wildcard patterns and for expanding paths with a `~' prefix for older SFTP servers.

-o ssh_option
    Can be used to pass options to ssh in the format used in ssh_config(5). This is useful for specifying options for which there is no separate scp command-line flag. For full details of the options listed below, and their possible values, see ssh_config(5).

AddKeysToAgent

AddressFamily

BatchMode

BindAddress

BindInterface

CASignatureAlgorithms

CanonicalDomains

CanonicalizeFallbackLocal

CanonicalizeHostname

CanonicalizeMaxDots

CanonicalizePermittedCNAMEs

CertificateFile

ChannelTimeout

CheckHostIP

Ciphers

ClearAllForwardings

Compression

ConnectTimeout

ConnectionAttempts

ControlMaster

ControlPath

ControlPersist

DynamicForward

EnableEscapeCommandline

EnableSSHKeysign

EscapeChar

ExitOnForwardFailure

FingerprintHash

ForkAfterAuthentication

ForwardAgent

ForwardX11

ForwardX11Timeout

ForwardX11Trusted

GSSAPIAuthentication

GSSAPIDelegateCredentials

GatewayPorts

GlobalKnownHostsFile

HashKnownHosts

Host

HostKeyAlgorithms

HostKeyAlias

HostbasedAcceptedAlgorithms

HostbasedAuthentication

Hostname

IPQoS

IdentitiesOnly

IdentityAgent

IdentityFile

IgnoreUnknown

Include

KbdInteractiveAuthentication

KbdInteractiveDevices

KexAlgorithms

KnownHostsCommand

LocalCommand

LocalForward

LogLevel

LogVerbose

MACs

NoHostAuthenticationForLocalhost

NumberOfPasswordPrompts

ObscureKeystrokeTiming

PKCS11Provider

PasswordAuthentication

PermitLocalCommand

PermitRemoteOpen

Port

PreferredAuthentications

ProxyCommand

ProxyJump

ProxyUseFdpass

PubkeyAcceptedAlgorithms

PubkeyAuthentication

RekeyLimit

RemoteCommand

RemoteForward

RequestTTY

RequiredRSASize

RevokedHostKeys

SecurityKeyProvider

SendEnv

ServerAliveCountMax

ServerAliveInterval

SessionType

SetEnv

StdinNull

StreamLocalBindMask

StreamLocalBindUnlink

StrictHostKeyChecking

SyslogFacility

TCPKeepAlive

Tag

Tunnel

TunnelDevice

UpdateHostKeys

User

UserKnownHostsFile

VerifyHostKeyDNS

VisualHostKey

XAuthLocation

-P port
    Specifies the port to connect to on the remote host. Note that this option is written with a capital `P', because -p is already reserved for preserving the times and mode bits of the file.

-p  Preserves modification times, access times, and file mode bits from the source file.

-q  Quiet mode: disables the progress meter as well as warning and diagnostic messages from ssh(1).

-R  Copies between two remote hosts are transferred through the local host by default. This option instead copies between two remote hosts by connecting to the origin host and executing scp there. This requires that scp running on the origin host can authenticate to the destination host without requiring a password.

-r  Recursively copy entire directories. Note that scp follows symbolic links encountered in the tree traversal.

-S program
    Name of program to use for the encrypted connection. The program must understand ssh(1) options.

-T  Disable strict filename checking. By default when copying files from a remote host to a local directory scp checks that the received filenames match those requested on the command-line to prevent the remote end from sending unexpected or unwanted files. Because of differences in how various operating systems and shells interpret filename wildcards, these checks may cause wanted files to be rejected. This option disables these checks at the expense of fully trusting that the server will not send unexpected filenames.

-v  Verbose mode. Causes scp and ssh(1) to print debugging messages about their progress. This is helpful in debugging connection, authentication, and configuration problems.

-X sftp_option
    Specify an option that controls aspects of SFTP protocol behaviour. The valid options are:

nrequests=value
    Controls how many concurrent SFTP read or write requests may be in progress at any point in time during a download or upload. By default 64 requests may be active concurrently.

buffer=value
    Controls the maximum buffer size for a single SFTP read/write operation used during download or upload. By default a 32KB buffer is used.

EXIT STATUS
Ex -std scp

SEE ALSO
sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5), sftp-server(8), sshd(8)

HISTORY
scp is based on the rcp program in Bx source code from the Regents of the University of California. Since OpenSSH 9.0, scp has used the SFTP protocol for transfers by default.

AUTHORS
Timo Rinne <Mt tri@iki.fi> Tatu Ylonen <Mt ylo@cs.hut.fi>

CAVEATS
The legacy SCP protocol (selected by the -O flag) requires execution of the remote user's shell to perform glob(3) pattern matching. This requires careful quoting of any characters that have special meaning to the remote shell, such as quote characters.